Eikelberger Awning &
Drapery Co.

How We Measure for Custom Awnings and Shades


Eikelberger Awning & Drapery Co. · 6 min read · Updated November 2026

We measure every awning and shade ourselves on site, because each one is custom-made and has to fit the opening, the wall and the sun on it. Eikelberger Awning & Drapery in Sparks offers a free analysis and estimate for homes and businesses in Reno, Sparks and the surrounding areas, and the measurements below are what we take.

Key points

  • We measure every opening ourselves, on site.
  • For shades: width, drop and inside or outside mount.
  • For awnings: width, projection, height, mounting surface and obstructions.
  • Photos sent with the form help us come prepared.
  • The analysis and estimate are free.
Hands holding a tape measure across a window frame

We accurately measure all projects to be custom-made for precision and functionality. Here is what that means in practice, so you know what we look at and what helps when you call.

What Do We Measure for a Window Shade?

For a shade we measure three things: the width, the drop and where it will mount. Each opening gets its own measurements, because windows that look alike are rarely the same size.

Mount matters first. An inside mount sits within the window frame, for a clean look with the frame showing. An outside mount sits on the wall or trim above the window and covers the opening, which is the choice when the frame is too shallow or when you want to cover as much light as possible at the edges. On a free analysis we confirm which suits each window.

What Do We Measure for a Window Shade?
MeasurementWhat it tells us
WidthHow wide the shade must be for the mount we choose
DropHow far the fabric needs to fall, including past the sill if wanted
MountInside the frame or outside on the wall or trim
Frame depthWhether the shade and its headrail fit inside
OperationManual, cordless or motorized; where the motor and power go

What Do We Measure for an Awning?

An awning has more dimensions than a shade. We take the width of the area to cover, the projection (how far the awning reaches out from the wall), the height where it will mount, and the mounting surface. The surface decides how the awning is anchored: wood framing, masonry and stucco all take different hardware.

Projection ties to the sun. The Building America Solution Center notes that awnings can shade windows while allowing view, but "direct sunlight is likely to bypass awnings when the sun is not directly overhead." So we look at which way the wall faces and when the sun reaches it before we settle on how far out the awning should go.

Obstructions and Other Things We Look For

The tape measure is the easy part. The rest is what is around the opening.

  • Obstructions: gutters, downspouts, light fixtures, vents, meters and trim that sit where the frame or arms will go.
  • Windows and doors: how they open, so an awning or shade never blocks them.
  • Sun path: which way the glass faces and when the sun comes in.
  • Wind exposure: for retractable awnings, how open the spot is.
  • Power: where a motor, sensor or remote receiver will plug in.
  • Finish and trim: the color of the wall, fascia or window trim, so the new piece looks like it belongs on the building.

How Does the Free Analysis and Estimate Work?

The analysis and estimate cost you nothing. Where a permit or an HOA applies, we check with the building department for each job.

Once the numbers are on paper, they go to our shop. Because we design and manufacture in our own Sparks shop, the person who measured the opening and the people who build the awning work under one roof, and shades are ordered to those same measurements, which keeps the details of your wall or window from getting lost between steps. When it is time for installation, the same measurements tell the installers where every bracket, arm and headrail goes.

  1. Call us or send the form on any page of our site. Photos of the windows or the wall help.
  2. We talk through what you want: shade, privacy, glare, a place to sit outside.
  3. We come measure each opening ourselves and look at the wall, the sun and anything in the way.
  4. You choose the style, fabric, color and operation, manual or motorized.
  5. We design the awning or shade to those measurements and give you the estimate.
  6. We build or order it and install it to the exacting specifications that our discriminating customers demand.

What Eikelberger Does

We design, make in our own Sparks shop and install window and door awnings and canvas, and we measure, order and install retractable awnings, roller shades and blinds. See all our services. You can read the fabric side in our roller shade fabrics guide, and see how the projection decision plays out in retractable versus stationary awnings.

Sources (2)

Related Questions


Do I need to measure my windows before calling?

No. We measure every project ourselves. A few photos of the windows or wall sent with the form help us come prepared.

What is the difference between an inside mount and an outside mount?

An inside mount sits within the window frame. An outside mount sits on the wall or trim above the opening and covers it. We confirm which fits each window when we measure.

What is projection on an awning?

Projection is how far the awning reaches out from the wall. It decides how much shade you get and how it relates to the sun's angle.

Do you measure for shades as well as awnings?

Yes. We accurately measure all projects, awnings and window shades alike, so each one is custom-made for precision and functionality.

More questions and answers

Call Us Today for a Free Estimate

(775) 358-1903

Eikelberger Awning & Drapery Co. designs, manufactures and installs custom awnings, shading systems, window coverings and canvas products for homes and businesses in Reno, Sparks and northern Nevada. Tell us what you have in mind and we will get back to you, Monday through Friday, 8:00 am to 4:30 pm.

  • 1903 Hymer Ave., Sparks, NV 89431
  • Nevada Contractor’s License: 25300
  • Family-owned and operated for six decades

Request a Free Estimate

Up to 8 photos. Big ones are resized on your device before they are sent.