Metal & Aluminum Awnings
When Is a Metal Awning the Right Choice?
Eikelberger Awning & Drapery designs and installs custom metal awnings, often called aluminum awnings, for homes and businesses in Reno, Sparks and northern Nevada. Metal is one of the awning materials on our own product list, and our Nevada contractor's license covers it.
We accurately measure all projects, so a metal awning is made for your door, window or storefront.
A metal awning is a fixed, rigid cover for a door, a window, a walkway entry or a storefront. It stays where it is built, shades the opening every sunny day and gives the entry some cover from rain and snow. That makes it a natural fit for the places that get used all day: a front door, a side entry, an office door, a service counter or a business entrance that customers walk through.
Homeowners in Reno and Sparks often choose a metal or aluminum awning when they want a clean, permanent line over an entry. Businesses choose it for the same reason, plus the room it gives to carry a name or address. If you would rather have a soft fabric look, our canvas and fabric awnings cover the same openings. If you want shade that moves, see retractable awnings.
Call Us Today
For a free estimate on your project, call Eikelberger Awning & Drapery Co. at (775) 358-1903 or request a free estimate online.
Our Nevada License Covers Metal Awnings
Awning work is a licensed trade in Nevada, and ours is on the record. We hold Nevada Contractor's License 25300 with two classifications, C-14C Ornamental Metal and C-14H Awnings and Louvres. Nevada's administrative code (NAC 624.310) describes the awning classification as "The fabrication and installation of awnings and louvres made of wood, fabric, plastics, metal or other acceptable products."
In plain terms, the state treats metal awnings as part of the awning trade, and the same company that measures your opening also installs the awning. Our work is design, on-site manufacturing, and meticulous installation. The license number appears on this site because Nevada asks licensed contractors to show it in their advertising.
How We Measure and Install a Metal Awning
- Call or send the form for a free analysis and estimate.
- We measure the opening: width, the projection you want, the mounting height and what the wall is made of, whether stucco, siding, block or wood framing.
- We talk through the look: color, edge style, whether the awning carries a name or address, and how it sits with the rest of the building.
- The awning is made to those measurements.
- Our crew installs it to the exacting specifications that our discriminating customers demand.
See awnings we have made for homes and businesses in our photo gallery.
Metal Awnings for Homes and for Businesses
For a home, think of entries and of windows on the sunny sides of the house. The Building America Solution Center (Pacific Northwest National Laboratory, for the U.S. Department of Energy) says horizontal exterior shading such as awnings "can be very effective at shading windows while still allowing view." The same page notes that direct sunlight is likely to bypass awnings when the sun is not directly overhead, which is why we size the projection to the window and the side of the house it faces. For smaller openings, see window and door awnings.
For a business, a metal awning gives an entrance a defined, finished look and covers the door in rain, snow and sun. Customers and delivery drivers get a sheltered place to stand. We design the awning to carry your name, logo or lettering when you want it. Our storefront, office and restaurant awnings page explains how that works across a building.
Snow, Wind and What the County's Table Lists
Northern Nevada puts real loads on anything bolted to a wall. Washoe County's Construction Design Requirements page, which cites the 2024 Northern Nevada code amendments, lists a wind design speed of 120 mph in the residential code table and a ground snow load of 43 pounds per square foot for Risk Category II at both 4,500 and 5,000 feet, with a footnote that the final roof snow design load "shall not be less than 29 psf." Those are the county's table values, not a reading of your property. The building department applies them to your parcel.
What we do with this is practical. We choose the attachment for your wall material, size the awning for its location and talk through what the county or city will want to see before we build.
Permits and Neighborhood Rules
Permit rules depend on the size of the awning and the jurisdiction. In unincorporated Washoe County, the county's list of work exempt from building permits includes window awnings supported by an exterior wall that do not project more than 54 inches from it, with additional limits on setbacks. Other awnings are reviewed case by case, and the City of Reno publishes its own permit page and exemption references under its 2024 building codes.
If your home is in a community with an architectural committee or HOA, check with it first. We check with your city or county building department before we build, and we are glad to talk through the details when you call.
Keeping a Metal Awning Looking Good
- Rinse dust and dirt off with a garden hose a few times a year.
- Wash with mild soap and water and a soft brush, then rinse well.
- Clear leaves and debris from the top so water drains freely.
- Look over the fasteners and edges at the change of seasons.
- Call us if a section is bent, loose or pulling away from the wall.
Questions About Metal & Aluminum Awnings
Do you offer metal awnings and aluminum awnings?
Yes. Metal awnings, often called aluminum awnings, are on our product list, and our Nevada contractor's license includes the awning classification that covers them. We measure your opening and install an awning made to fit it.
Can a metal awning carry my business name?
Yes. For a business we can design an awning that shows your name, logo or lettering for your entrance, and we go over the layout with you before it is made.
What does a metal awning cost?
The price depends on the size, the projection, the wall and the design, so we give it after we measure. The analysis and estimate are free, and Eikelberger guarantees quality workmanship, competitive pricing and personal service.
Does a metal awning need a permit?
It depends on the awning and where you live. Washoe County's exempt-work list includes some small wall-supported window awnings, and other jobs go through the building department. We check with your city or county building department before we build.
Can you repair or replace an old awning?
Yes. Our full-service repair facility handles awning repair and re-covering, and we can install a new awning to fit the same opening. See awning repair and re-covering.
Sources (6)
- Eikelberger Awning & Drapery Co.: eikelbergerawningnv.com/ (checked November 2026)
- Nevada Legislature: leg.state.nv.us/NAC/NAC-624.html (checked November 2026)
- Washoe County: washoecounty.gov/building/getting_started/Construction_Design_Requirements.php (checked November 2026)
- Washoe County: washoecounty.gov/building/Files/Files/Handouts/Work%20Exempted%20from%20Permits-MH%20final (checked November 2026)
- City of Reno: reno.gov/business-development/development-services/building-permits.php (checked November 2026)
- PNNL / DOE Building America Solution Center: basc.pnnl.gov/resource-guides/window-attachments-solar-control-and-energy-efficiency (checked November 2026)
Call Us Today for a Free Estimate
Eikelberger Awning & Drapery Co. designs, manufactures and installs custom awnings, shading systems, window coverings and canvas products for homes and businesses in Reno, Sparks and northern Nevada. Tell us what you have in mind and we will get back to you, Monday through Friday, 8:00 am to 4:30 pm.
- 1903 Hymer Ave., Sparks, NV 89431
- Nevada Contractor’s License: 25300
- Family-owned and operated for six decades
